thanks for the extra mile team!
So I havent tried this update yet but will tonight. After a reset, My device freezes immediately after it gets to the main screen… At which point I can’t access any type of menu. The instructions for updating the firmware say to put the device in USB mode. How do I do this if its frozen?
Hi @Brent , I just did the update, my jumps disappeared from the log book as well, and the weather is not working… 
Hi @brent
Similar story Im afraid, downloaded and installed update ok.
I still cannot select a drop zone as the list on the device is only a partial list. My sync on login doesnt pick up my cloud defaults either (although the sync on login says it does)
My log book has been replaced, I had about 5 dodgy entries of which one was actual, i marked it as flat … other jumps were spurious and my journey to the DZ.
Now I have 2 logs dated 7th that just contain rubbish data
Weather not working either.
Cheers Brent keep up the good work 
v3.3.3 is released https://dekunu.info/2H9JoTX
Please try downloading this new firmware and trying again. Note: Please make sure the filename is called exactly dekunufw_v11_1.unu or else it will not install. Sometimes when you have downloaded a file of the same name previously it will add a bracketed number to the filename. If so, simply delete the old file and rename the latest downloaded one.
1 Like
Updated to v3.3.3 and whether I do or don’t have a GPS fix I can manually select any of the listed DZs (which still includes some extra DZs I’ve never heard of but whatever) and it doesn’t freeze. When the auto change DZ prompt pops up selecting yes took me to the DZ list and let me change it with no freezing. The time is the correct daylight savings time so far. The jump log data still looks jumbled but things are looking up 
3 Likes
Same result with mine. Thanks for the effort! Looks good!
Only one comment for the sake of completeness: I recognized that the time setting was back to 12h instead of 24h. But I do not know if this was directly after the FW update or after switching the user (as an attempt to download emergency contacts from the cloud). But I could easily change it back with the setting section and everything is fine again.
Hi,
i try to download the v3.3.3 over the firmupdate functon of the the dekunu. But my device say there is no new fw and the v3.3.2 is the actual.
How can i install the v3.3.3 over the usb mode? I´m not so super in these it things. I´m just a normal user. So i would need an explaination how to install the v3.3.3 when it is not function to install it over the firmwareupdate function.
Many thanks.
Christian
Am I correct in assuming this FW update recommended for all users, despite experiencing the errors or not?
Hi Christian @Tamagotchi ,
please follow this way:
Connect your ONE to a computer, Mac, whatever via USB
Press the button marked with (1)
Press the button marked with (2)
Press the button marked with (3)
Press the button marked with (4)
Press the button marked with (5)
Your ONE will now reboot and will remain on the following screen:
On your computer enter the “explorer” on Windows systems or the “finder” on a MAC. You will notice a new volume. The following screenshot is from a MAC, but this is not relevant, as the content shown is exactly the same on a Windows computer:
Download the latest Firmware by using the above mentioned link:
https://dekunu.info/2H9JoTX
Save the file named “dekunufw_v11_1.unu” on your computer and move it into the new volume into the root directory, NOT in any of the appeared new folders.
Now safely remove the USB volume by using a right mouse click on your computer (if your setting is in german, it should say “auswerfen”). Now the ONE will reboot automatically and will download the newest versions on itself and everything will be fine.
5 Likes
Many thanks!
It works fine!
2 Likes
After a bit testing I see the time issue is just related to the user switch and has nothing to do with the new FW release.
See also:
1 Like
Hi @brent
The later patch has resolved my dropzone/pla selection problems, The weather is working and from the correct locale
Issues: Jumps still scrambled, showing #1 on the main screen the log shows 2 jumps, #0 (complete twaddle) and #2, also rubbish data, neither correlate to the cloud log entries of which no 2 is valid (marked flat) the other two and the corresponding landing circle icons on the cloud homepage are rubbish. Updated contact info doesnt sync to the device, battery life questionable
If you could tidy that up for me ill have nothing to report until I jump some more
1 Like
Hi, Thanks for the info, but where did you get the updates? So the Firmware??
Here is the file link.
https://dekunu.info/2H9JoTX
Please review the steps detailed higher in this thread to install
1 Like
Yes, i have the new update from here. but from where you have it ??
why can not I load it from the dekunu?
Once you have downloaded it, you must copy it to your device when it is connected to your computer and in USB mode. This update also fixes the automatic firmware update functionality on the device so you won’t need to manually do it again in the future
1 Like
Hi. I’ve got 3.3.4 and my jump counter still don’t update I see you mentioned it here so I was just wondering if the fix has been made and mine has an issue or is it still to come?
Yet to arrive, if you mean the counter on your device not showing the number of jumps you did (neither with your Dekunu, nor including all your other jumps before your Dekunu).
1 Like