Dekunu stays in tracking mode in plane and during jump

Jumped at a dz that does 2 passes per load. Once the first load jumped, alti switched to tracking mode and stayed that way throughout the rest of the plane ride, after I jumped, and even on the canopy ride down.

This is a known issue. I had it also and they are working on it.

@akuyihuithis is fixed in the latest firmware release! it now has:
• ability to stop live action if incorrectly started (i.e. when driving a car)
• device now reverts to Plane Mode after incorrect Jump Mode starts (after a plane levels out for hop & pops then re-climbs)

1 Like